Fashion · Needlework

Embroidered Floral Sweater

floral_sweater_21
Finished!

I think this little project started because I was still working on the hand basting for my coat and wanted to make something easy that I could enjoy finishing.

Is procrasti-make a word?

I had the floral knit in my stash and a tested pattern ready to go.* Finally all of that pattern prep (and shopping) was going to pay dividends!

At the same time, my January 2019 issue of Threads Magazine arrived. I devoured the article Luscious Sweater Knits by knitwear designer Olgalyn Jolly.**

Under “Flat Hems” on page 37, she writes:

If hemming, don’t sew a knit with poor recovery directly to itself; the hem tends to flare out. Instead, apply a fine stretch mesh or lingerie elastic along the hem allowance to ensure good recovery at the hem.

What a great idea at the perfect time! I quickly added her technique to my plan.

* See Giant Stripes Two Ways

** Threads gives online access to their issues through paid subscriptions, so unfortunately, I can’t provide a link.

floral_sweater_2
Swedish pattern paper pieces on the sweater knit

The pattern is the Hallå Slim Dolman pattern for women. I chose the tunic length, long sleeve option with hems instead of bands. I had to iron my pattern pieces from last time, but other than that, I just had to take them out of the envelope. In this case, there was no need to even pin the pattern to fabric. The swedish tracing paper clung to the sweater knit, which behaved well while cutting.

Delighted with how well everything was going, I never noticed that I forgot to cut a collar band. By the time I got to it, I didn’t have any material left. We’ll get back to that issue in a minute.

I noticed right away that I would need to keep handling to a minimum, as the edges raveled very easily. Time to put my sweater-knit tricks new and old into practice!

Trick 1: Stabilize shoulder seams

This is a good idea with most knits, but especially where the fabric may not be strong enough to support the weight of the garment. The last time I used (2-way) fusible knit interfacing, I gathered up the scraps and cut them into strips. I fused them in place on all four shoulder edges.

Trick 2: Stretchy stabilized hems

Using the Threads article as a general guide, I put together some really stable and flat hems. I didn’t have lingerie elastic or lightweight mesh on hand, so I cut strips from a piece of power mesh. If you are not familiar with power mesh, you would recognize it as the mesh often used in ready-to-wear bras and shapewear. The only color I had was a hot pink, but since there was pink in the sweater, I figured any show-through would look intentional. I made a little slide show detailing how the hems came together.

This slideshow requires JavaScript.

Trick 3: Baste with Wonder Tape

Remember how I forgot to cut a neckband? When I figured out what I did, I looked around for some fabric that would work as a stand-in, but nothing grabbed me. Then I tried it on without the band. The neck opening is very wide, but I kind of liked it. I figured that if I added bra-strap carriers, it would be pretty easy to wear.

I applied wash-away wonder tape to the edge of the neckband for two reasons. First, it served to stabilize the fragile curve and prevent raveling. Second, I could use it as a guide to turn a precise 1/4 in. hem.

floral_sweater_6
Neatly basted 1/4 in neck opening
Trick 4: Stabilize neckline with strong and decorative embroidered edge

At this point, I could have stitched the neck in place and called it a day. I just thought the top needed a little something extra. Why not use embroidery to highlight it? At the same time, the hand stitching would secure the hem in place.

Using some plain embroidery floss I had on hand, I stitched a simple cross stitch pattern around the entire neck. It’s now a very secure hem, but gives the neck a unique embellishment. My work is not quite as precise as I would like, but that is more than made up for by how happy I am with the color and pattern.

Even with all of the embroidery and extra steps, this was a quick project. I would definitely do another one – just maybe with a neckband next time.

Look familiar? The Super Quick Stash-Buster Scarf was actually made from the scraps left over from cutting this top.

SUPPLIES
Fashion Show

I reviewed the Slim Dolman on patternreview.com. Click here to view.

Happy sewing!

sewing_sig

floral_sweater_1

One thought on “Embroidered Floral Sweater

  1. Looks great! love the embroidery on the neckline, very clever. I really like the tip of stabilizing the hem, I’ll have to try it with sweater knits.

Leave a Reply