Fashion

Black and White Tulip Tee

I have an easy one for today. I was in the mood to make casual tops, so I pulled out a pattern I have been wanting to try for a while: McCall’s M7247. I bought the pattern because I really liked the views with overlapped curved edges. It seemed like it would have interesting possibilities for color blocking.

I also had some very nice knits in my collection that I purchased with the hopes of using them together. Fabric 1 was a rayon/spandex blend in black. Fabric 2 was a horizontal black and white stripe. I had bought both fabrics from Fabric Mart Fabrics online thinking that they were the same material in different colors. They weren’t. That’s one of the pitfalls of shopping for fabric online. Don’t make assumptions. If you have doubts, ask!

tulip-front-tee7
One of these knits is not like the other. Opacity issue led to Choice No. 1 with black on top.

The stripe is lightweight enough that dark colors show through. The black is tightly woven and has good stretch and recovery. Looking at the pattern, it seemed like it would still be fine to combine them, as long as the black was always on top of the white, not vice versa.

I took the pieces for View C and made my own variation. My top has long sleeves and uses only two colors.

Construction was really easy. Ironing the curved hem was the only part that I wished would end before it was over. But it’s a wide curve and really not difficult.

I considered a few different embellishments. I decided against a little pocket because I couldn’t find a shape that really worked with the big sweeping curves. Instead I made a cover button with the stripe fabric. Putting the button on the shoulder of the top flap just seemed to fit. Also, it gave me a way to see the stripes on top of solid black without the black showing through.

tulip-front-tee9
Pocket? Button? Both? None?

This is the first time I have made a cover button. If I had known it was so easy, I would have done it sooner! I used Dritz 7/8 inch “half-ball” cover button forms which just snap together. No special tools needed.

Back opening in a RTW top (Amazon)

Overall, I really like how it turned out. The one issue is that the bottom flap can easily show bare skin depending on how high the waistband is on what you are wearing underneath. My plan is to wear this with yoga pants in the winter and a high-waisted long knit skirt in the summer. The jeans I am wearing in the pictures looked fine for a while, but as the waist loosened up, my skin started to pop out. Some people have lengthened the top to combat this. I suspect that this issue is the reason that I have only seen this type of style in stores with the opening in the back.

The pattern is staying in the keep pile nonetheless. I think it would be really cute sleeveless or short-sleeved for warm weather. I might try eliminating the hemmed edge and do a bias facing instead.

Coming soon: more sweater knits and Marfy blouse toile.

Fashion · Whimsy

Wintertime Friends Tee

gnomeandpig1
Close up of “Best Friends” panel

Some time last summer, I saw this print for sale in the Wanderlust Designs Custom Fabric Facebook group. Even though the next snowflakes were at least 5 months away, I knew I would want it when they came. Pig and Gnome on stump in the snowy woods… how could I not? The design is printed on a 28″ x 36″ cotton/lycra panel.

Well, it’s December and the snow is here. All of my other projects would just have to wait. I pushed all of my works in progress off the table and started on my tee.

81TUQLvY5sL._SL1500_I wear a lot of long sleeve tee shirts in the colder months – sometimes as a layer, sometimes alone. I already had a pattern ready to go, having made my Walk the Dog Raglan using McCall’s M7286 earlier this year. I just needed to change the sleeves into long sleeves and decide on the layout.  I found a gray knit from my stash that coordinated with the panel and got to work.

Planning the front was easy. I knew that I wanted the characters to be centered on the lower half of the shirt front. Unfortunately, that left a somewhat awkward shaped remnant. There was just no way I was going to be able to use any of the remainder in the shirt. So the sleeves, neckband, and back are all in solid gray.

I made a sleeve pattern based on the medium length piece I already had. Once I was finished, I looked at the picture on the pattern cover and realized that it already contained one. Oh, well. Good practice, I guess. I also changed the bottom to be straight across instead of rounded.

Everything went together quickly on the serger.

I did two things differently this time.

gnomeandpig4
Contrast topstitching

After reading some thoughts of fellow sewing bloggers, I decided to try using stretch thread in both the upper and lower loopers for my overcast seams. I haven’t had any problems with regular thread, but I was curious to see if there was a difference. I set up the serger to do a 4-thread mock safety stitch with maxi-lock all-purpose thread in the needles and maxi-lock stretch in the loopers. Stitching went smoothly. The result did seem to be a bit stretchier. What I really like is that the seams feel softer against the skin.  I might not do it this way every time, but for knit apparel, it certainly works nicely. If it does well in the washer I’ll definitely use the stretch in both loopers again.

gnomeandpig5
Hem fused in place before stitching

This other thing I did was stabilize the hem before cover-stitching. I saw a mention for Heat-n-Bond Soft Stretch fusible in a sewing magazine’s new products section and thought it might be just the thing. I wanted something that would keep the hem from stretching excessively under the presser foot, but still maintain the softness and stretch of the original fabric. Bingo! The Soft Stretch Lite did exactly what I wanted, and came in a convenient 5/8″ roll. (I had expected to have to cut my own strips). This is the best cover-stitch finish I have done yet, although I know I can still get better.

gnomeandpig6
The coverstitch hem turned out better than before – only a little tunneling in one area.

Here is the final result. Hot cocoa, anyone?

Fashion

Burgundy Cowl-Neck Tunic

V9055_03
Cover art for V9055 View C

This is one of those projects where the fabric dictated what it wanted to be. As soon as I saw the gorgeous heathered burgundy hacci fabric, I knew it was meant to be a loose cowl-neck pull-over. And it would be mine. I guess if pressed, I would deny that the fabric literally spoke to me, but fellow sewists will recognize that subtle whisper.

I love cowl neck garments in the cooler months. Now that there are so many lovely lightweight knits on the market, sweaters can use bulkier design elements like cowls, gathers, and draping. With that in mind, I landed on Vogue 9055. One of the views was exactly what I had in mind. View C is a cowl-neck raglan tunic with a high-low hem and a kangaroo pocket (which I omitted). Although I had recently done a raglan tee and copied out a good version of the pattern, I chose to start fresh with this one since I was looking for a garment with more ease.

red_tunic1
The sleeve pieces fit together so the outside wraps around the inside. In other words, you have a seam on each side of your wrist, not one down the middle.

Vogue 9055 is a “Very Easy” pattern, and this time I agree. I spent more time preparing the pattern and cutting out the pieces than I did assembling everything. I even made it a bit more complicated by finishing all of the raw edges and it still was only about two hours of actual sewing.

This pattern was unusual in that it featured a two-part sleeve. I was a little concerned that the sleeve seams would be prominent and distracting in the finished garment, but my fears were unfounded. I’m intrigued and hope to learn more about them and how they can best be used.

I was surprised that the neckline was so deep. It’s clearly shown on the illustrations, but somehow I didn’t notice. I think if I were to make this with the regular scoop neckline, I would make the neckline a little higher. I would also try omitting the darts, especially if I was going for a sportier look.

Once again, I used serger thread only for the serger’s loopers and used “regular” thread for the serger needle. It would have been nice to match all of the thread, but when the garment is on, the black looper threads don’t show at all.

Next time, a short detour into activewear again. What are you making for fall?