Contest · Fashion

Fall Wardrobe: Floral Princess Seam Top

Screen Shot 2018-09-26 at 10.26.39 AM
Mine is View A

Fall wardrobe item number three is hot off the ironing board! For those who are new, I have been making a five piece coordinating mini-wardrobe to enter in patternreview.com‘s 2018 mini wardrobe contest.

My new top is a take off on McCall’s M7356 pattern. View A has short sleeves, no sash, no godets and no hi-low hem. I do like the frillier versions, I just wanted something a little more serious for Fall.

Since I hadn’t made anything with princess seams in a while, I started by making a muslin. I lengthened the waist as usual before cutting anything, but otherwise made no changes. Even though the thin white cotton woven was only for practice, it frayed so easily that I went ahead and overcast all of the edges. Then I basted the whole thing together using my new favorite trick, the double-eye machine needle (if you missed it, I talk about it in my last post here).

princess_top_2
My muslin (View D with sleeve)

I was delighted to find that the only change I needed was to raise the shoulders by 3/8 inch. It’s a good thing I remembered that that also meant changing the sleeves and facings before I cut into the good fabric!

I thought it would be neat to change the center panel to a contrasting pattern. I selected gold stretch velvet, because it coordinated with the floral pattern and I also planned on using it in another wardrobe item. The gold by itself looked terrible. It had way too much shine to go with the flat cotton. I found some black crochet lace in my stash and tested a layered look. Bingo!

I again prepared the panels, facings and sleeves by overcasting the edges. For the layered panel, I pinned the top and bottom together carefully then headed to the serger. Both of the layers stretched like crazy, and not in the same way, either! It was ok, but far from perfect. After some consideration, I forged ahead anyway.

princess_top_10
Layered center panel, piping and main fabric

I had recently purchased a cording foot and used that to insert the black piping. What a difference! The neat piping also stabilized and straightened the center panel quite a bit.

This slideshow requires JavaScript.

I again used the cording foot to insert a invisible zipper in the center back. It’s definitely better than using a plain zipper foot, but I suspect a purpose made invisible zipper foot would be even better.

princess_top_4
Velvet and lace before sewing

The only other construction detail that gave me pause was sewing the v-shaped neckline facing. I’m not a big fan of facings. Even when I catch-stitch them perfectly, they have a tendency to flip to the outside. I followed the instructions, but also understitched the whole neckline. I think it will be fine when I am wearing it, but because the front panel is so bulky, the centermost part does not want to lie flat. We’ll just keep that between us, right?

Scroll down to see the finished top. It looks a little more medieval princess costume than I intended, but that’s not necessarily a bad thing. I will add more pictures of me wearing it once it stops raining long enough to take them.

Supplies:

Cording feet are available in various styles. Mine is similar to this one. You can see that one side is higher than the other to allow the foot to contact both the cord and the fabric at the same time. If you are shopping, make sure the foot you purchase is compatible with your machine.

The last two projects for the contest are nearing completion, so I’ll be back soon.

Until then, happy sewing!

sewing_sig

I reviewed this pattern on patternreview.com here.

Contest · Fashion

Fall Wardrobe: Asymmetrical Wrap Skirt

pinstripe_wrap_skirt_13Here’s the second item for the Autumn 2018 collection: an easy asymmetrical wrap skirt. If the fabric looks a little familiar, it’s because I have already used it in two other garments:

Pinstripe Pantsuit Part 1: the Pants

Pinstripe Pantsuit Part 2: the Vest

I bought five yards of it a few years ago from FabricMartFabrics.com and even after this skirt, I still have more than a yard. I don’t think you have seen the last of it yet!

This skirt is one of McCall’s 2018 early fall patterns, M7813. The pattern includes options for different hem profiles, but they all share the same basic design. I was drawn to view D, which has two curved front pieces that come together in a neat jagged line. It’s a very simple pattern. The only closure is a single snap. There are no pockets, lining, or anything tricky. It may not be obvious on first glance, but all views cinch at the natural waist, continuing anther 5 inches or so upward. The part above the waist can be turned down, sort of like a shirt collar.

pinstripe_wrap_skirt_9I like that this skirt can work with or without tights as a transitional piece. I just wore it for the first time and loved the way it looked in the mirror. But…. if you plan on wearing it on a windy day, definitely consider putting in some extra closures. While having your skirt fly up worked for Marilyn Monroe, it’s not really what I’m going for. I’m still deciding how I want to handle mine.

I did another contrast facing with the skirt. This time I chose a scrap of flannel stripe that I salvaged from a jacket that was on its way to jacket heaven. The pattern matched almost too perfectly. It might add a little more bulk than desirable, but it’s really soft and comfortable.

I don’t have too much to say about construction or techniques this time. It was so darned easy! Instead, I’ll just post the supply list and some pretty pictures.

Supplies

pinstripe_wrap_skirt_14

I plan on entering this skirt in patternreview.com‘s 2018 Mini Wardrobe contest. It will be item 2 of 5. Don’t worry – I’ll remind you when voting opens!

Until next time, happy sewing!

sewing_sig

 

Fashion

Black and White Tulip Tee

I have an easy one for today. I was in the mood to make casual tops, so I pulled out a pattern I have been wanting to try for a while: McCall’s M7247. I bought the pattern because I really liked the views with overlapped curved edges. It seemed like it would have interesting possibilities for color blocking.

I also had some very nice knits in my collection that I purchased with the hopes of using them together. Fabric 1 was a rayon/spandex blend in black. Fabric 2 was a horizontal black and white stripe. I had bought both fabrics from Fabric Mart Fabrics online thinking that they were the same material in different colors. They weren’t. That’s one of the pitfalls of shopping for fabric online. Don’t make assumptions. If you have doubts, ask!

tulip-front-tee7
One of these knits is not like the other. Opacity issue led to Choice No. 1 with black on top.

The stripe is lightweight enough that dark colors show through. The black is tightly woven and has good stretch and recovery. Looking at the pattern, it seemed like it would still be fine to combine them, as long as the black was always on top of the white, not vice versa.

I took the pieces for View C and made my own variation. My top has long sleeves and uses only two colors.

Construction was really easy. Ironing the curved hem was the only part that I wished would end before it was over. But it’s a wide curve and really not difficult.

I considered a few different embellishments. I decided against a little pocket because I couldn’t find a shape that really worked with the big sweeping curves. Instead I made a cover button with the stripe fabric. Putting the button on the shoulder of the top flap just seemed to fit. Also, it gave me a way to see the stripes on top of solid black without the black showing through.

tulip-front-tee9
Pocket? Button? Both? None?

This is the first time I have made a cover button. If I had known it was so easy, I would have done it sooner! I used Dritz 7/8 inch “half-ball” cover button forms which just snap together. No special tools needed.

Back opening in a RTW top (Amazon)

Overall, I really like how it turned out. The one issue is that the bottom flap can easily show bare skin depending on how high the waistband is on what you are wearing underneath. My plan is to wear this with yoga pants in the winter and a high-waisted long knit skirt in the summer. The jeans I am wearing in the pictures looked fine for a while, but as the waist loosened up, my skin started to pop out. Some people have lengthened the top to combat this. I suspect that this issue is the reason that I have only seen this type of style in stores with the opening in the back.

The pattern is staying in the keep pile nonetheless. I think it would be really cute sleeveless or short-sleeved for warm weather. I might try eliminating the hemmed edge and do a bias facing instead.

Coming soon: more sweater knits and Marfy blouse toile.

Fashion

Mystery Activewear 1: Have You Tried Turning it Off and On Again?

off_and_on_again18
The contents of the mystery pack cut and pinned for four garments.

Today’s activewear project is a complete set of shorts and long sleeveless top.  Last month, I impulse-bought a mystery pack of athletic-brushed-poly (ABP) prints from Zenith and Quasar. I love their designs, so I was pretty sure I would be able to use most of what I got. I was promised a USPS padded flat rate envelope (PFRE) stuffed with a variety of small and large pieces, and that was exactly what I got.  I took inventory and found that I had two groups of coordinates.

Group 1: Coding, Windows & Space Invaders – blue and white with primary color accents

Group 2: Black and Green Tech – Black and variegated dark colors with lime green accents

Each grouping contained a panel and coordinating fabrics of different dimensions. The panels are set up with a design centered on one half so that they can easily be cut into shirts. While both panels were a full 60 inch width, only the blue had an entire yard of length.

Washing and drying brought out the “brushed” texture of the ABP, which before washing was smoother than I had expected. There was plenty of stretch and recovery, so I was confident that it would work well as close-fitting gym wear.

I started working on Group 2 first, for the sole reason that I already had my machines were already threaded in black. I’ll feature Group 1 in an upcoming post.

I designed a top around the panel print (“Have you tried turning it off and on again?”). I selected a Butterick “lisette” pattern which contained a basic athletic tank with built-in sports bra (B6295). I centered the panel design on the tank front, and cut the rest of the top from that panel piece.

I mostly followed the instructions, but chose to make the bra with sewn-in cups instead of removable ones. Making my maillot last summer gave me the confidence to try doing custom cups. In some ways, it makes it easier to sew, since you don’t have to mess with making the hidden inner cup pockets. In other ways, it is more work because you need to take the time to fit and sew foam cups. Since I don’t machine-dry my tops, sewn-in is a better long term option for me. I won’t have to re-adjust the foam every time I run the top through the laundry.

This slideshow requires JavaScript.

The inner bra is constructed of two layers. The inner layer provides structure with power mesh fabric and in my case, foam cups. The outer layer (next to the skin) is made from the fashion fabric. The two layers are held in place with an elastic band enclosed in a casing made from the fashion fabric. Elastic casings have been a lot easier since I started using Dritz elastic threaders. I have tried a lot methods, but these little flat plastic things are the fastest and never twist the elastic.

Although the ABP is soft and stretchy, it is a little thicker than other spandex options. As a result, I found that even after pressing, the neck and armhole edges would not lay flat. The instructions call for understitching as much as possible. I have never seen understitching make such a big difference! This is the kind of step that is so easy to skip, but don’t do it!  It took the top from homemade to professional in just 15 extra minutes. The instructions showed using a straight stitch to understitch, but just to be on the safe side, I used a narrow zigzag.

off_and_on_again8
I love that fabric!

Compared to the top, the shorts were so easy that they almost seem like an afterthought. But I think that the circuit board coordinate really makes the outfit. I had to be a little creative since I only started with a wide horizontal strip about 10 inches high. A review of all of my pattern stash options led to McCall’s M7514, which had a yoga-style pant. Since M7514 featured a one-piece leg, it used less fabric horizontally. If you do the math, adding a single seam adds 5/8 in. to each piece, which would be 4 pieces total in the case of a typical 2 piece leg. So 5/8 x 4 = 2 1/2 inches. That doesn’t include the extra you may or may not need for placement. Normally it doesn’t matter, but in this case the pieces only just fit. I squared off the fabric and cut the the leg pieces with as much length as I could. Then I cut the waistband from the remaining bits of the panel. I had to cut two pieces and sew them together to make that work, but I could live with that.

The shorts were super-simple to make. I hemmed them with a 1/4 inch narrow hem, which saved a little more length and gave them a whopping 2 3/4 inch inseam. Still, they are longer than a lot of yoga shorts out there and seem to stay in place as I move around.

Thoughts? Leave a comment!

Fashion

Girl Power Shorts

A friend gave me a neat cotton/spandex panel which features some of my favorite movie heroes.  I really wanted to make something with it, but I didn’t have any matching fabric and the design was located inconveniently right in the middle of the small (fat half size) piece.

After ruminating for a while, I thought it was worth a try to just lay out some pieces and see how they fit.  That way I would know how best to plan color blocking for the extra material I would need to get.

IMG_3563
Trying to fit the shorts pattern on my fat half

Since I was really trying to conserve fabric and I also needed some new workout shorts, I raided my pattern stash for the simplest, smallest shorts I would actually wear.  I have some fancy patterns with interesting details, but those extra seamlines and pieces take more yardage. I found a very basic leggings pattern with lots of length variations (McCall’s M6360).  After just rough cutting the tissue pieces and placing them over the design, I was a little discouraged.  It didn’t seem like there was any way to have a logical placement of the design and still have yardage left to cut more than one piece.  It was really close though.

I took my measurements and found my pattern size.  The outside lines of the multi-size pattern were two sizes above what I needed.  Things were looking up!

Next, I carefully placed the pattern tissue for one of the back pieces over the graphic.  I was able to get the whole image only if it wrapped around my rear on one side.  I can live with that.  There was only one way the design was going to fit (okay – I had to cut off a tiny bit of the design), so I cut that piece first.

I figured it was also fine to put the white border inside the seam allowance and hem, so that made my working area a little bigger.  With that in mind, I cut two more pieces – the other back and one of the fronts.  Now it was really just scraps.

I just wasn’t happy with my options for the last front piece. I knew if I didn’t have the same fabric, any color blocking would risk uneven wear and probably a weird looking result.  I’m all for weird, but on my terms.

IMG_3564
Putting the last piece together with scraps. Note that I am using my favorite quick and dirty basting method again: blue tape.

Finally, I realized that if I carefully used the white border to make horizontal stripes, I would be able to take the odd-sized black scraps to complete the last piece.

With a little more careful cutting and piecing, I had the striped piece ready to go.

Putting the shorts together was super easy. It was all done on the serger using familiar techniques. There is an elastic waistband and coverstitched hem.

I feel quite pleased that I squeezed a whole pair of shorts out of half a yard – and no leftovers!

Well, I’m off to rule the universe.  When I get back – more fun activewear!

Thoughts? Leave a comment!