Fashion

Vogue V8792 Bias Tee Shirt 3 Ways

download
I made Views A and B (Short Length)

I had a lot of fun last week putting together some cute lightweight tee shirts. Vogue V8792 has been on my to-sew list for a while. I initially chose it because I liked the interesting way the stripes were positioned on the top in the cover photo. Did I mention I love stripes? But when I started looking at the details, I was really intrigued by the short sleeve views (A, B, C). The long and the short sleeve shirts are completely different, not just the same shirt with options. The long sleeve versions are fitted and have set-in sleeves. The short sleeve ones are loose fitting and made from only 3 pieces: front, back and neckband. The front and back are cut on the bias and attach together like a puzzle. That sounded like a lot more fun!

My first version used a lightweight gray rib knit with a subtle heathered stripe. I thought the stripe would create an interesting effect where the two bias pieces met. It went together quickly on the serger – cutting it out took about the same amount of time as sewing. I was surprised that I didn’t see the effect I was expecting though. It turns out that I somehow ignored the layout directions and cut the front and back pieces on grain instead of on bias. Oops. The shirt is still nice, still wearable, but a little disappointing.

Since it was so easy to make, I thought I would give it another try and see if I would like it better if I followed the instructions! I made two more, both using a mix of different colors.

The second tee used up a pretty mottled green remnant that was about 1/4 yard long and full width. I paired it with a sheer cream color knit that was a little too transparent to use on the front. I made the neckband a little wider than the pattern called for, but otherwise this one followed the pattern instructions. The difference is subtle when there is no obvious stripe, but I think the shirt may drape a little better than the gray one.

The third tee gave me an opportunity to try a color combination I love: sky blue and white. There isn’t a lot to add about this one, but isn’t it cute?

Summer, here I come!

Happy sewing!

sewing_sig

Fashion

Black and White Tulip Tee

I have an easy one for today. I was in the mood to make casual tops, so I pulled out a pattern I have been wanting to try for a while: McCall’s M7247. I bought the pattern because I really liked the views with overlapped curved edges. It seemed like it would have interesting possibilities for color blocking.

I also had some very nice knits in my collection that I purchased with the hopes of using them together. Fabric 1 was a rayon/spandex blend in black. Fabric 2 was a horizontal black and white stripe. I had bought both fabrics from Fabric Mart Fabrics online thinking that they were the same material in different colors. They weren’t. That’s one of the pitfalls of shopping for fabric online. Don’t make assumptions. If you have doubts, ask!

tulip-front-tee7
One of these knits is not like the other. Opacity issue led to Choice No. 1 with black on top.

The stripe is lightweight enough that dark colors show through. The black is tightly woven and has good stretch and recovery. Looking at the pattern, it seemed like it would still be fine to combine them, as long as the black was always on top of the white, not vice versa.

I took the pieces for View C and made my own variation. My top has long sleeves and uses only two colors.

Construction was really easy. Ironing the curved hem was the only part that I wished would end before it was over. But it’s a wide curve and really not difficult.

I considered a few different embellishments. I decided against a little pocket because I couldn’t find a shape that really worked with the big sweeping curves. Instead I made a cover button with the stripe fabric. Putting the button on the shoulder of the top flap just seemed to fit. Also, it gave me a way to see the stripes on top of solid black without the black showing through.

tulip-front-tee9
Pocket? Button? Both? None?

This is the first time I have made a cover button. If I had known it was so easy, I would have done it sooner! I used Dritz 7/8 inch “half-ball” cover button forms which just snap together. No special tools needed.

Back opening in a RTW top (Amazon)

Overall, I really like how it turned out. The one issue is that the bottom flap can easily show bare skin depending on how high the waistband is on what you are wearing underneath. My plan is to wear this with yoga pants in the winter and a high-waisted long knit skirt in the summer. The jeans I am wearing in the pictures looked fine for a while, but as the waist loosened up, my skin started to pop out. Some people have lengthened the top to combat this. I suspect that this issue is the reason that I have only seen this type of style in stores with the opening in the back.

The pattern is staying in the keep pile nonetheless. I think it would be really cute sleeveless or short-sleeved for warm weather. I might try eliminating the hemmed edge and do a bias facing instead.

Coming soon: more sweater knits and Marfy blouse toile.

Fashion · Whimsy

Wintertime Friends Tee

gnomeandpig1
Close up of “Best Friends” panel

Some time last summer, I saw this print for sale in the Wanderlust Designs Custom Fabric Facebook group. Even though the next snowflakes were at least 5 months away, I knew I would want it when they came. Pig and Gnome on stump in the snowy woods… how could I not? The design is printed on a 28″ x 36″ cotton/lycra panel.

Well, it’s December and the snow is here. All of my other projects would just have to wait. I pushed all of my works in progress off the table and started on my tee.

81TUQLvY5sL._SL1500_I wear a lot of long sleeve tee shirts in the colder months – sometimes as a layer, sometimes alone. I already had a pattern ready to go, having made my Walk the Dog Raglan using McCall’s M7286 earlier this year. I just needed to change the sleeves into long sleeves and decide on the layout.  I found a gray knit from my stash that coordinated with the panel and got to work.

Planning the front was easy. I knew that I wanted the characters to be centered on the lower half of the shirt front. Unfortunately, that left a somewhat awkward shaped remnant. There was just no way I was going to be able to use any of the remainder in the shirt. So the sleeves, neckband, and back are all in solid gray.

I made a sleeve pattern based on the medium length piece I already had. Once I was finished, I looked at the picture on the pattern cover and realized that it already contained one. Oh, well. Good practice, I guess. I also changed the bottom to be straight across instead of rounded.

Everything went together quickly on the serger.

I did two things differently this time.

gnomeandpig4
Contrast topstitching

After reading some thoughts of fellow sewing bloggers, I decided to try using stretch thread in both the upper and lower loopers for my overcast seams. I haven’t had any problems with regular thread, but I was curious to see if there was a difference. I set up the serger to do a 4-thread mock safety stitch with maxi-lock all-purpose thread in the needles and maxi-lock stretch in the loopers. Stitching went smoothly. The result did seem to be a bit stretchier. What I really like is that the seams feel softer against the skin.  I might not do it this way every time, but for knit apparel, it certainly works nicely. If it does well in the washer I’ll definitely use the stretch in both loopers again.

gnomeandpig5
Hem fused in place before stitching

This other thing I did was stabilize the hem before cover-stitching. I saw a mention for Heat-n-Bond Soft Stretch fusible in a sewing magazine’s new products section and thought it might be just the thing. I wanted something that would keep the hem from stretching excessively under the presser foot, but still maintain the softness and stretch of the original fabric. Bingo! The Soft Stretch Lite did exactly what I wanted, and came in a convenient 5/8″ roll. (I had expected to have to cut my own strips). This is the best cover-stitch finish I have done yet, although I know I can still get better.

gnomeandpig6
The coverstitch hem turned out better than before – only a little tunneling in one area.

Here is the final result. Hot cocoa, anyone?

Fashion · Whimsy

Walk the Dog Raglan Tee

Planning Time
Planning is fun!

Last week, my serger died.  Let’s pause a moment and mourn its passing.

Thank you.

So I got a new one!  And this serger has a lot more bells and whistles.  Welcome to the workshop Singer 14T968DC!  The new machine can do the functions of the old serger, a Simplicity 4-thread overlock. But the new one can be converted to work as a cover-stitch machine as well.  I have been giddy to try everything since I got it out of the box.  I already had several knitwear projects cut and ready to sew, so I will be able to create useful things as I learn.

First up is a simple raglan tee.  I used McCall’s pattern M7286 (rating Easy), but any favorite raglan pattern would do.  I have always been drawn to bright red clothes and anything with high contrast and color blocking.  Something about that sharp, vivid combination of black and white with any bright color really puts me in a great mood.  So when I saw the “Where’s Fido” pattern, I immediately thought about pairing it with blocks of black or red.  Plus, the dogs in the pattern are so whimsical and cute – how could I resist?

I considered black accents, but in the end, I cut out a red neckband and short red sleeves to go with the patterned front and back.

I have been using my duct tape double to test fit clothes as I go.  I’m glad I did. On the model, I could see that the shape was a little boxier than I usually like.  I pinned some darts into the back and it looked much better.  Since the top is so casual that it could even serve as sleepwear, I chose to leave it loose and boxy.  But before I took the pins out, I made new pattern pieces for the back and front. I reduced the back by the area pinched out by the darts.  I lengthened the side seam on the front to match the new back piece. Then I traced the new pieces onto swedish tracing paper, cut them out, and put them with the rest of the (tissue) pattern pieces.  The next time I make this raglan, I will have a choice between a straight or fitted version.

Now that I have the coverstitch machine, I wish I had cut the bottom straight across. Then I could have done a completely ready-to-wear hem finish.  The shaped hemline seemed like it would be better suited to a zigzagged narrow hem though.  So I will save the coverstitch for a future project.

 

It turned out so cute, I can hardly believe it.  If only my dog had a matching leash and collar…

(getting out markers) Hmmm….